Wind Turbine Vertical Axis H Rotor Type with 1 KW Capacity at Suwuk Beach, Kebumen

Achmad Gustiantono, Dominicus Danardono Dwi Prija Tjahjana, Syamsul Hadi

Abstract


Tulisan ini membahas tentang analisa potensi energi angin di pantai Suwuk Kebumen dan perancangan turbin angin tipe H-Rotor yang sesuai dengan karakteristik angin di pantai tersebut. Analisa potensi energi angin menggunakan metode distribusi Weibull berdasarkan data kecepatan angin di lokasi pengukuran selama 2 tahun. Analisa distribusi Weibull menunjukkan karakteristik kecepatan angin di lokasi pengukuran yang akan dijadikan dasar dalam perancangan turbin angin H-Rotor. Perancangan turbin angin H-Rotor terdiri dari komponen-komponen seperti sudu, strut, dudukan strut, poros, tiang, dan generator. Diperoleh rancangan turbin angin H-Rotor dengan diameter x tinggi sebesar 2,7 x 2,7 meter menggunakan airfoil tipe NACA 0018 dengan kapasitas daya keluaran sebesar 1 kW.

Full Text:

PDF

References


S., Eko, Baruna, Pusat data dan Informasi ESDM

Mathew, Sathyajith, Wind Energy Fundamentals, Resource Analysis and Economics. New York: Springer. 2006.

M.S., Hameed, A., Kamran, Design And Analysis Of A Straight Bladed Vertical Axis Wind Turbine Blade Using Analytical And Numerical

Techniques. Journal of Ocean Engineering, Vol. 57, pp. 248-255. 2013.

J., Anderson, Fundamental of Aerodynamics. McGraw Hill Series in Aeronautical and Aerospace Engineering. 2010.

Koksal, Self-Starting Darrieus Wind Turbine. Design Project, MECH4020. Department of Mechanical Engineering Dalhousie University. 2004.

Koksal, Vertical Axis Wind Turbine. Design Project MECH4010. Department of Mechanical Engineering Dalhousie University. 2005.

R.W., Tresher, Trend in Evolution of Wind Turbin Generator Configuration and Systems. Journal of Wind Energy, Vol. 1, No. 1, pp. 70-86. 1998.

R.S., Khurmi, J. K., Guptha, A Textbook of Machine Design. New Delhi: Eurasia Publishing House (Pvt) Ltd. 2002.

K.R., Ajao, J.S.O., Adeniyi, Comparison of Theoretical and Experimental Power output of Small 3-bladed Horizontal-axis Wind Turbine. Journal of American Science, Vol. 5, No. 4. 2009.

Blackwell, Wind Tunnel Performance Data for Darrieus Wind Turbine With NACA 0012 Blades. Sandia Laboratory Energy Report. 1977.

Nurchayati, W., Kade, Karakteristik Kincir Angin Tipe Wind Mill Berbahan Fiber Metal Laminate (Fml) Pada Variasi Kecepatan Angin Dan Sudut Kemiringan Blade. Jurnal Teknik Rekayasa, Vol. 10, No. 1, pp. 1-4. 2009.

S.O., Oyedepo, S.A., Muyiwa, S.P., Samuel, Analysis of wind speed data and wind energy potential in three selected locations in south-east Nigeria. Journal of Energy and Environmental Engineering, Vol. 3, No. 7. 2012.

M., Mulyadi, Analisis Aerodinamika pada Sayap Pesawat Terbang dengan Menggunakan Software Berbasis Computational Fluid Dynamics (CFD). Depok: Universitas Gunadarma. 2010.

N., Tanti, A., Arnetto, Pembuatan Program Perancangan Turbin Savonius Tipe-U Untuk Pembangkit Listrik Tenaga Angin. Journal of Mechanical, Vol. 2, No. 1, pp. 1-5. 2011.

H., Arwoko, Desain Turbin Angin. Surabaya: Departemen MIPA UBAYA. 1999.

N ., Mittal, Investigation of Performance Characteristics of a Novel VAWT. Thesis. UK: Departement of Mechanical Engineering University of Strathclyde. 2001.

J.F., Manwell, J.G., McGowan, A.L., Rogers, Wind Energy Explained, Theory, Design an Aplication. John Wiley and Son,Chichester. 2002.

Y., Daryanto, Kajian Potensi Angin Untuk Pembangkit Listrik Tenaga Bayu. Balai PPTAGG - UPT-LAGG. 2007.

P., Jain, Wind Energy Engineering. United States: The McGraw-Hill. 2011.

Islam, Analysis Of The Design Parameters Related To A Fixed Pitch Straight-Bladed Vertical Axis Wind Turbine. Journal of Wind Engineering, Vol. 32, No. 5, pp. 491–507. 2008.

M. R., Sidiq, Pembuatan dan Pengujian Turbin Angin Darrieus dengan Diameter 30 cm dan Tinggi 30 cm. Tugas Akhir Sarjana. Bandung: Teknik Penerbangan UNNUR. 2008.


Refbacks

  • There are currently no refbacks.


Mekanika: Majalah Ilmiah Mekanika

ISSN: 1412-7962 || eISSN: 2579-3144

Address :  Jl. Ir Sutami no 36 A, Building I, Faculty of Engineering, Universitas Sebelas Maret, Surakarta.

Phone    :  +62271632163 

email     : mesin@ft.uns.ac.id

 

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License