Deteksi Kerusakan Ring Piston Pada Mesin Empat Langkah Melalui Pengukuran Sinyal Getaran
Abstract
Abstract : The purpose of this study is to develop the piston ring damage detection technique using vibration analysis. Vibration analysis was performed by measuring vibration in four stroke engine which were worn and scratched on its piston ring, then compare it with the vibrations generated by engine which had a good conditions. Tests carried out on engine revolution of 750, 1500, and 2250 rpm, where the sensor were placed on the cylinder head and cylinder block. Vibration measurement produced a signal in the time domain, which then be analysed their signal energy with the aid of Matlab software. Result of the research showed that the vibration signal energy decrease in all of the strokes of the defect piston ring. It was caused by the pressure of the defect piston ring smaller than the good piston ring’s. The decrease of vibration signal energy in suction and compression stroke were greater than the power and exhaust stroke. Indication of piston ring defect could be shown from the decrease in the vibration signal energy in all of the strokes.
Keywords : Vibration signal, Signal energy, Fault detection, Piston ring, Four-stroke engine
Full Text:
PDFRefbacks
- There are currently no refbacks.
Mekanika: Majalah Ilmiah Mekanika
ISSN: 1412-7962 || eISSN: 2579-3144
Address : Jl. Ir Sutami no 36 A, Building I, Faculty of Engineering, Universitas Sebelas Maret, Surakarta.
Phone : +62271632163
email : mesin@ft.uns.ac.id
This work is licensed under a Creative Commons Attribution 4.0 International License