Experimental Studies of Twist Ratio Effect to The Heat Transfer Enhancement Using Square Cut Tape and Classical Tape Insert

Abstract

Bergles, A.E., 1985, Techniques to Augment Heat Transfer. In:Rohsenow, W.M., Hartnett, J.P.,Ganie, E. (Eds.), Handbook of Heat Transfer Application, McGraw-Hill, New York.

Cengel, Y.A., Cimbala, J.M., 2006, Fluid Mechanics: Fundamental and Applications, 1st edition, McGraw–Hill, New York
Holman, J.P., 2010, Heat Transfer, 10th ed., McGraw–Hill, New York

Lavine, A.S., Incropera, F., and De Witt, D., 2006, Fundamentals of Heat and Mass Transfer. John Wiley & Sons; 6th edition (March 10, 2006).

Kreith, F., Manglik, R., and Bohn, M., 2010, Principles of Heat Transfer, Cengage learning.

Manglik, R.M., and Bergles, A.E., 1992, Heat Transfer Enhancement and Pressure Drop in Viscous Liquid Flows in Isothermal Tubes with Twisted-Tape Inserts, Wärme-und Stoffübertragung, Vol. 27 (4), pp. 249-257.

Murugesan, P., Mayilsamy, K., and Suresh, S., 2010, Turbulent Heat Transfer and Pressure Drop in Tube Fitted with Square-Cut Twisted Tape, Chinese Journal of Chemical Engineering, Vol. 18 (4), pp. 609-617.

Murugesan, P., Mayilsamy, K., and Suresh, S., 2011a, Heat Transfer and Friction Factor in a Tube Equipped with U-Cut Twisted Tape Insert, Jordan Journal of Mechanical and Industrial Engineering, Vol. 5 pp. 559-565.

Murugesan, P., Mayilsamy, K., Suresh, S., and Srinivasan, P., 2009, Heat Transfer and Pressure Drop Characteristics of Turbulent Flow in a Tube Fitted with Trapezoidal-Cut Twisted Tape Insert, International journal of academic research, Vol. 1 (1).

Pratik P. Ganorkar, R.M. Warkhedkar,2015, Heat Transfer Enhancement in a Tube Using Elliptical-Cut Twisted Tape Inserts, International journal of mechanical engineering, Vol 2.

Quazi, I., and Mohite, V. 2015, Heat Transfer Enhancement in a Heat Exchanger Using Punched and V-Cut Twisted Tape Inserts.

Suresh, K.P., Raju, K., Mahanta, P., and Dewan, A., 2005, Review of Passive Heat Transfer Augmentation Techniques, Proceedings of the Institution of Mechanical Engineers (I-Mech-E) Part A, Journal of Power and Energy, Vol. 218 (7), pp. 509-527.

Petukhov, B., 1970, Heat Transfer and Friction in Turbulent Pipe Flow with Variable Physical Properties, Advances in heat transfer, Vol. 6 (503), pp. i565.

Salam, B., Biswas, S., Saha, S., and Bhuiya, M.M.K., 2013, Heat Transfer Enhancement in a Tube Using Rectangular-Cut Twisted Tape Insert, Procedia Engineering, Vol. 56 pp. 96-103.

White, F.M., 2003, Fluid Mechanics,(2003). McGraw-Hill.
Yunus, A.C., 2003, Heat Transfer: A Practical Approach, MacGraw Hill, New York, Vol.